Options
Multi Angle Lens
Recommended for large workpieces or workpieces with difficult angles to set
Rotational Angular Jig
Recommended for pipes or pins that can revolve on thier axes
| Dimensions |
W 140 × L 200 × H 120 mm |
| Angle adjustment |
0〜90° |
| Rotation range |
360° |
| Workpiece size limitations |
Outer diameter:2〜50mm
Inner diameter:22〜100mm |
Precision Vise
A compact type precision vise suitable for tiny workpieces.
| Dimensions |
W 23 x L 65 x H 30 mm |
| Jaw Plate Gap |
Max. open range 20 x D 10 mm |
| Weight |
0.3kg |
| Material |
SK2 |
| Hardness |
HRC54±2 |
| Parallel and Vertical Angle Variance |
Within 0.005 mm / 100 mm |
Precision Vice (2.5 inch)
The jaws can be opened and closed for easy placement and removal, and the V-groove in the jaws makes it suitable for affixing round workpieces.
| Dimensions |
W 62 x L 175 x H 59 mm |
| Jaw Plate Gap |
Max. open range 79 x D 29 mm |
| Weight |
3.3kg |
| Material |
SK2 |
| Hardness |
HRC54±2 |
| Parallel and Vertical Angle Variance |
Within 0.005 mm / 100 mm |
Angle Adjustable Vise (2 inch)
Workability is greatly improved because the angle can be freely adjusted to allow for an easier approrch and the V-groove in the jaws makes it suitable for affixing round workpieces.
| Dimensions |
W 83 x L 176 x H 98 mm |
| Jaw Plate Gap |
Max. open range 79 x D 29 mm |
| Weight |
5.5 kg |
| Material |
SK2 |
| Hardness |
HRC54±2 |
| Parallel Angle Variance |
Within 0.003 mm / 100 mm |
| Vertical Angle Variance |
Within 0.005 mm / 100 mm |
Angle Adjustable Vice (3 inch)
With one simple step, the angle can be adjusted from 0 to 90 degrees and locked in place. Also you can prevent slipping with a 15 degree increment fixing pin.
| Dimensions |
W 185 x L 192 x H 120 mm |
| Jaw Plate Gap |
Max. open range 100 x D 40 mm |
| Weight |
5.5 kg |
| Material |
Cast iron |
| Angle Range |
0 – 90 degrees *Can be set at every 15 degrees |
| Parallel Angle Variance |
Within 0.003 mm / 100 mm |
| Vertical Angle Variance |
Within 0.005 mm / 100 mm |
Scroll Chuck Type Punchformer(4 inch)
This punchformer has a center hole that goes all the way through, allowing for long punches and ejector pins to be inserted. It also can be rotated and fixed at any angle.
| Dimensions |
W 108 x L 210 x H 133 mm |
| The center of the scroll chuck |
H 70 mm |
| Inner keys |
φ29 ~ φ84 mm |
| Weight |
8.2 kg |
| Rotational Fix Point |
24 increments of 15 degrees |
| Scale |
Every 15 degrees from 0 – 90 degrees |
| Parallel Angle Variance |
本尺1度・副尺5分 |
| Chuck |
3 set of 4 inch keys |
Included accessories
Protective goggles, laser reflection filter, wire holder, welding wires, wire cutter
＊Included accessories can change withuout notice
